Diamond RED Medium Aggregate Green Concrete Saw Blade

Soff Cut Diamond Blades Red Color For Medium to Hard Aggregate Green Concrete Cutting

1. Soft Cut Early Entry Diamond Blades Description

As concrete is placed and being finished, chemical reactions begin to take place causing the slab to increase in temperature. Stress, caused bu shrinkage, begins to accumulate rapidly. At this time the concrete is looking for relief. If not relieved in a timely manner the concrete will relieve itself, resulting in random cracks appearing across the surface of the slab.

Soft Cut is the leading early entry concrete sawing system, allow you to cut in the green zone as the part of the finishing process, which control random cracking through the early timing of cut. The high production rate of soff-cut blades and the ability to cut the same day make soff-cut the best option for cutting green concrete.

WTSC series soft cut blade are designed for early entry cutting of control joints within one to two hours of concrete finishing. It has 5 different bond with different paint colr, and this purple color paint is a soft bond for cutting the hard aggregate concrete. With a SC arbor to 1 inch bushing, make the blades fit to most of the cut off saws.

2. Specificaiton of WTSC series

3. Bond Option

Available in 5 colors for different aggregates

• Purple- Ultra Hard Aggregate - Soft Bond
• Green - Hard Aggregate - Medium/Soft Bond
• Red - Med. to Hard Aggregate - Medium Bond
• Orange - Med.Aggregate - Medium/Hard Bond
• Yellow - Medium to Soft Aggregate - Hard Bond

4. Character

• Laser welded with 10mm tall segments and high quality diamond grade.
• 5 different bond for different aggregate cutting
• Different segment width can meet different work requirment..
• Soft cut to 1" bushing, help the blades can be used on most of the cut off saws.
• Best quality can best cutting value.

5. Recommeded Materials

• Great for asphalt, green concrete, concerete overlay.

6. Worked On

• For use on Soft Cut Saws and most of the 1" arbor cut off saws.

7. Other Notes

Without a control or relief joint made into the material, heat and cold aligned with curing can casue expanding and contracting of the concrete, creating uncontrolled cracks throughout. Those cracks will eventually create ruptures and sections that can pull apart from the rest of the material.

Making a controlled cut in the concrete controls where the cracks appear. When this procedure is done in determined spaced sections, the damage and cracking is kept at a minimum which prolongs the life of the concrete slab.